Polypropylene for chemical resistance and dimensional stability Colder Products COLDER COUPLER: POLYPROPYLENE, ¼ IN, INSERT X TUBE, SHUT-OFF, 1 13/16 Colder Shutoff Fitting 1/4 Hose Barb Valved In Line Coupling Insert Mount Coupling Body Male Working pressure of up to 120 psi Colder Products Company manufactures quick-connect couplings, fittings, and connectors for plastic tubing. Insert coupler on one end and barbed construction on the other end for connecting tubes with different ends on a bulkhead The Colder panel-mounted insert is made of polypropylene and has insert and barbed connectors. Size. 3/8" Insert x 3/8" Barb · Material. Polypropylene · Brand. Colder Products Company · Colour. Gray · Item dimensions L x W x H 5.1 x 2.5 x 2.5 Centimetres Insert coupler has one or more ribs for creating a tight seal and connects tubing in a straight run The working pressure for this fitting is up to 120 pounds per square inch (psi). This fitting is made of polypropylene, which resists most chemicals, has dimensional stability, and can be sterilized. They are designed so that hose is easily mounted over the fitting, but is difficult to remove. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. It has one or more ribs for creating a tight seal and connects tubing in a straight run. Barbed fittings are characterized by the presence of angled barbs that grab and hold on the inner diameter (ID) of a hose. 1/2 NPT Valved Insert NS6D24008BSPT 1/2 BSPT Valved Coupling Insert NS6D40008 1/2 JACO Valved Panel Mount Insert NS6D42006 3/8 Hose Barb Valved Panel Mount Insert NS6D42008 1/2 Hose Barb Valved Panel Mount Insert O-Rings and Seals (2) 1884300 Gasket, Panel Mount, for Coupling Insert (NS6) 1889600 Gasket, Panel Mount, FKM (Viton®) for Coupling...
