Onboard ETH/Micro TF/USB Interfaces Meet The Needs Of Specific Applications In Development Caution 1., Do not plug or unplug any device other than a USB while it is powered on., 2., Confirm the fan voltage before connecting, only 5V fans are supported., 3., The Type C interface can be used as a power supply or as a USB interface to program the image (need to use the DIP switch to switch)., 4., In order to ensure the normal power supply for CM4, please do not connect other devices when using the Type C interface to program the image., 5., When CM4 is in normal use, it needs to provide 5V/2A power supply for CM4., Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on., 6., USB2., 0 is closed by default, if you want to open it, you need to add dtoverlay=dwc2, dr_mode=host in config., txt., 7., For Opwenwrt, see the instructions for use., 8., This expansion board does not support the POE function. Product description Mini Dual Gigabit Ethernet Base Board Designed For Raspberry Pi Compute Module 4 Overview CM4-DUAL-ETH-MINI, a baseboard that can be used with Raspberry Pi Compute Module 4, supports 5V DC Type-C interface power supply, and features dual Gigabit Ethernet ports, single-channel USB2., 0 with a fan interface and standard Raspberry Pi 40Pin interface, which is suitable for scenarios requiring multiple network ports such as soft routing. Standard CM4 Socket And 40PIN GPIO Header Suitable For Compute Module 4 Lite/EMMC Series Module Soft Router Baseboard Raspberry Pi4 4gb Mini Dual Gigabit Ethernet Base Board For Raspberry Pi Compute Module 4 CM4, Onboard ETH/Micro SD/USB Interfaces, Suitable For Evaluating The Raspber Raspberry Pi 4 B Waveshare Dual Gigabit Ethernet Type-C Power Fan USB 40Pin Suitable for All Variants of Compute Module 4, Only Including CM4 DUAL ETH MINI Baseboard with fast shipping and top rated customer service. shopping CM4-DUAL-ETH-MINI, a baseboard that can be used with Raspberry Pi Compute Module 4., Do not plug or unplug any device other than a USB while it is powered on. For ensuring the normal power supply for CM4, please do not connect other devices when using the Type C interface to program the image. WIFI6 Dual ETH Base Board/Mini-Computer Designed for Raspberry Pi Buy 22360 / 23697 / 23852 Mini Dual Gigabit Ethernet Base... The Type C interface can be used as a power supply or as a USB interface to program the image (need to use the DIP switch to switch). When CM4 is in normal use, it needs to provide 5V/2A power supply for CM4., Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on.
